How To Setup Any Hikvision IP Camera: #1 Easy Way Via Hikvision Software [IVMS]

You got your new Hikvision camera and now you want to set it up and start working with it with no extra help and you got no technician or engineer skills. You hit the right article. Right now we are going to show you the #1 easy and fast way to setup your new Hikvision wifi ip-camera via the Hikvision tools and services. This guide includes the PC and a Phone software that allows you to work with the cameras.

Note that Hikvision cameras require us to use a PC for the initial setup and configuration.

PC Tools

You will need:

  1. The SADP tool. Basically, a device search tool allowing us to find devices within our subnet and to see the device status. Official Hikvision download pages:
    Windows: Download
    Mac OS: Download
  2. IVMS-4500: the actual software we’re going to use to setup the camera. There is also a way to use the web interface, but we will focus on this particular method now. Official Hikvision download page:
    Windows: Download
    Mac OS: Download
  3. EZVIZ Studio. As the Hikvision has a consumer-oriented sub-brand named Ezviz, Hikvision declares of a two-way support between Hikvision and Ezviz services. And that’s why we have the Ezviz Studio programm on our list. Well, this is a very common entry-level software that you can use to access the basic cam’s functions, but a Hikvision camera setup process requires us to use the SADP tool and the IVMS afterwards, because the Hikvision and Ezviz have a completely different setup processes. But after the setup is done, you are able to control all of your cameras remotely both via the Ezviz Studio, IVMS, or the phone’s Ezviz App, Hik-connect and mobile IVMS.

Don’t go to the next part until you got this software installed.

PC Setup

1. Plug in the power supply unit and / or LAN-cable and then we got to wait a minute till the cam adjusts itself and connects;

2. After that happened, go to PC and open the SADP tool. The SADP displays the status of all connected to your subnet devices. Find your camera within the list. You can see the SADP displays the camera is inactive;

3. Mark the checkbox located left to the ID column. New tab should slide out on your right and now you can see the network parameters;

4. Create a password and press activate. That’s it, we’re done with the SADP tool;

5. Open up the IVMS-4200, create an account if it asks you to;

6. Find your camera at the bottom tab;

7. Press and hold on your camera and drag it to the middle tab;

8. Press the “Remote Configuration” button;

9. Install the “Active X” driver if it asks you to by pressing the appearing link. It will download, install it and reload automatically. That should let you into the actual camera setup menu.

Camera Configuration Inside The IVMS-4200

Note this is a fast and easy setup tutorial, our goal is to show you the simplest way with no any additional features turn on.
1. System > System Settings > Time Settings. Select your time zone and also press the “sync with the PC” button to automatically set the correct time;

2. Go to Network > Advanced Settings > Wi-fi. Note – your router has to work on 2.4 g wave. Pick your network and type in your wi-fi password below and press save. For a static ip uncheck the box and enter the gateway manually;

3. The Video/Audio Tab. It depends on your camera: either it has a microphone or not. So this bar is responsible for it. Don’t have the microphone built-in cam? Just skip, it’s fine here;

4. The image settings. They are totally individual – you have a standard sliders to adjust the image;

5. The Event. Tick both boxes to turn the motion detect feature on, draw the detection area and save. If you turned on the motion detection, mark in the linkage method and A1 box too to make it work;

6. The final thing – schedule settings. Pick the event type if you have turned on the events and draw a required length. If you just want the camera to record continuously and you didn’t turn the events on – pick the continuous and draw the first line, then copy and multiply to other fields. Save, and we are done.

Phone Apps

The phone apps are not actually intended for a cameras setup and their purpose is to let you view and control some of the cam functions. Here we just want to show you the relevant apps that are compatible with Hikvision cams. That is the:

  • IVMS-4500 as a main software;
  • Hik-connect;
  • EZVIZ App as an easy casual software.

Download Pages

iOS:

Android:

Anyway, the Hikvision cameras setup requires us to use a Personal Computer with the programs or the web interface to make everything work. The phone apps allow us to use cameras functions, such as turning and remote view and control, but not the setup.

Video-Instruction:

Leave a Reply

Your email address will not be published. Required fields are marked *