Temperature screening & face recognition terminal Hikvision DS-K1T671TM-3XF

SKU: 000331
0 out of 5

0 REVIEWS
  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C;
  • Recognition distance: 0.3 to 2 m;
  • Fast temperature measurement mode;
  • Face mask wearing alert and forced mask wearing alert;
  • Displays temperature measurement results on the authentication page;
  • Triggers voice prompt when detecting abnormal temperature;
  • Face recognition duration < 0.2 s/User; face recognition accuracy rate ≥ 99%;
  • 50,000 face capacity, 50,000 card capacity, and 100,000 event capacity;
  • Suggested height for face recognition: between 1.4 m and 1.9 m;

2 614.50 £ excl. VAT

quantity

Temperature screening & face recognition terminal


DS-K1T671TM-3XF face recognition terminal is a kind of access control device integrated with temperature screening function. It can fast taking skin-surface temperature and upload abnormal temperature event to the center, which can be widely applied in multiple scenarios, such as enterprises, stations, dwellings, factories, schools, campus and so on.

  • Supports Vanadium Oxide uncooled sensor to measure target’s temperature.
  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C.
  • Recognition distance: 0.3 to 2 m.
  • Fast temperature measurement mode: Detects face and takes temperature without identity authentication.
  • Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc.
  • Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid.
  • Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed.
  • Displays temperature measurement results on the authentication page.
  • Triggers voice prompt when detecting abnormal temperature.
  • Configurable door status (open/close) when detecting abnormal temperature.
  • Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software.
  • Face recognition duration < 0.2 s/User; face recognition accuracy rate ≥ 99%.
  • 50,000 face capacity, 50,000 card capacity, and 100,000 event capacity.
  • Suggested height for face recognition: between 1.4 m and 1.9 m.
  • Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out.
  • Watchdog design and tamper function.
  • Audio prompt for authentication result.
  • NTP, manually time synchronization, and auto synchronization.
  • Connects to external access controller or Wiegand card reader via Wiegand protocol.
  • Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed.
  • Imports and export data to the device from the client software.
  • * Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
  • * In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.

Reviews (0)

0.0
0
0
0
0
0

Be the first to review “Temperature screening & face recognition terminal Hikvision DS-K1T671TM-3XF”

There are no reviews yet.